The EK-Quantum Reflection² PC-O11D EVO D5 PWM D-RGB distro plate features numerous ports and offers multiple ways of properly connecting it to other loop components like radiators, CPU, and GPU blocks. This article explains exactly which fittings (like extenders, adapters, angled adapters, etc.) can and should be used to properly connect the radiators and water blocks to this distro plate.
Here’s the table of content for easier navigation:
- Choosing the fittings according to the Radiator(s) used in the loop
- Choosing the fittings according to the CPU block used in the loop
- Choosing the fittings according to the GPU Block used in the loop
Choosing the fittings according to the radiator(s) used in the loop
The Lian Li O11 Dynamic EVO case provides enough room to fit several different-sized radiators simultaneously, so we decided to explain which fittings are to be used with different radiator setups.
Bottom radiators and port connections
| Num | Name | |
| S360 | 2 | EK-Quantum Torque Extender Static MF 28 |
| 2 | EK-Quantum Torque Rotary 90° | |
| 4 | EK-Quantum Torque HDC | |
| P360 | 2 | EK-Quantum Torque Extender Static MF 14 |
| 2 | EK-Quantum Torque Rotary 90° | |
| 4 | EK-Quantum Torque HDC | |
| S240 | 2 | EK-Quantum Torque Extender Static MF 28 |
| 2 | EK-Quantum Torque Rotary 90° | |
| 4 | EK-Quantum Torque HDC | |
| P240 | 2 | EK-Quantum Torque Extender Static MF 14 |
| 2 | EK-Quantum Torque Rotary 90° | |
| 4 | EK-Quantum Torque HDC | |
| X240 | 2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC |
Top radiators and port connections
| Num | Name | |
| S360 Tubes | 1 | EK-Quantum Torque Extender Static MF 28 |
| 2 | EK-Quantum Torque Extender Static MF 14 | |
| 2 | EK-Quantum Torque Rotary 90° | |
| 4 | EK-Quantum Torque HDC | |
| S360 Push-in | 1 | EK-Quantum Torque Extender Static MF 14 |
| 2 | EK-Quantum Torque Extender Static MF 28 | |
| 2 | EK-Quantum Torque Rotary 90° | |
| 2 | EK-Quantum Torque Push-In Adapter M 14 | |
| P360 Push-in | 1 | EK-Quantum Torque Extender Static MF 28 |
| 2 | EK-Quantum Torque Rotary 90° | |
| 2 | EK-Quantum Torque Push-In Adapter M 14 |
Side radiators and port connections (optional)
| Num | Name | |
| Tubes | 1 | EK-Quantum Torque Extender Static MF 28 |
| 3 | EK-Quantum Torque Rotary 90° | |
| 4 | EK-Quantum Torque HDC | |
| Push-in | 1 | EK-Quantum Torque Extender Static MF 14 |
| 1 | EK-Quantum Torque Extender Static MF 28 | |
| 1 | EK-Quantum Torque Extender Static MF 7 | |
| 3 | EK-Quantum Torque Rotary 90° | |
| 2 | EK-Quantum Torque HDC | |
| 1 | EK-Quantum Torque Push-In Adapter M 14 |
GPU and CPU water blocks connectivity
Given the wide variety of motherboards and graphics cards available on the market, this distro plate has multiple ports for CPU and GPU connections, so you must choose the most suitable fittings, extenders, and adapters for your project. We also offer Offset Fittings to help you achieve straight-line tubing routes from your CPU/GPU block to the DP ports.
Note: All Reflection², Vector², and Velocity² products, as well as all the Quantum Torque fittings, adapters, extenders, and Surface radiators, are made according to the EK-Matrix7 standard, enabling more user-friendly port connectivity. It also allows us to provide you with detailed info on how to easily connect the CPU and GPU blocks (Velocity² and Vector²) with the DP ports.
Choosing the fittings according to the CPU used in the loop
For products including EK-Quantum Velocity² Intel, AMD, and Momentum Monoblocks, use the following items:
No Offset:
| 2 | EK-Quantum Torque Extender Static MF 28 |
| 2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC |
Small Offset (0-3mm):
| 2 | EK-Quantum Torque Rotary Offset 3 |
| 2 | EK-Quantum Torque Extender Static MF 7 |
| 2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC |
Big Offset (3-7mm):
| 2 | EK-Quantum Torque Rotary Offset 7 |
| 2 | EK-Quantum Torque Extender Static MF 28 |
| 1 | EK-Quantum Torque Extender Static MF 14 |
| 2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC |
The Biggest Offset (7-14mm):
| 2 | EK-Quantum Torque Rotary Offset 14 |
| 2 | EK-Quantum Torque Extender Static MF 28 |
| 2 | EK-Quantum Torque Extender Static MF 14 |
| 2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC |
Monoblock:
| 2 | EK-Quantum Torque Extender Static MF 28 |
| 2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC |
VRM Bridge:
| 2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC |
Choosing the fittings according to the GPU Block used in the loop
Make note of the width of the GPU block from the product page (example below):
| Variation | |||
EK-Matrix7 Foundation GPU Block - 112mm Width Horizontal |
GPU Block Only - One tube on each side |
2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC | ||
| GPU Block Only - Both tubes on the backplate side | 1 | EK-Quantum Torque Double Rotary Offset 28 | |
| 1 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| ABP Set - One tube on each side | 2 | EK-Quantum Torque Extender Static MF 7 | |
| 2 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| ABP Set - Both tubes on the backplate side | 2 | EK-Quantum Torque Extender Static MF 7 | |
| 1 | EK-Quantum Torque Double Rotary Offset 28 | ||
| 1 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| Variation | |||
EK-Matrix7 Foundation GPU Block - 126mm Width Horizontal |
GPU Block Only - One tube on each side |
2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC | ||
| 2 | EK-Quantum Torque Rotary Offset 14 | ||
| GPU Block Only - Both tubes on the backplate side | 1 | EK-Quantum Torque Double Rotary Offset 28 | |
| 1 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| 1 | EK-Quantum Torque Extender Static MF 14 | ||
| 2 | EK-Quantum Torque Rotary Offset 14 | ||
| ABP Set - One tube on each side | 2 | EK-Quantum Torque Extender Static MF 7 | |
| 2 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| 2 | EK-Quantum Torque Rotary Offset 14 | ||
| ABP Set - Both tubes on the backplate side | 2 | EK-Quantum Torque Extender Static MF 7 | |
| 1 | EK-Quantum Torque Double Rotary Offset 28 | ||
| 1 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| 1 | EK-Quantum Torque Extender Static MF 14 | ||
| 2 | EK-Quantum Torque Rotary Offset 14 | ||
| Variation | |||
EK-Matrix7 Foundation GPU Block - 133mm Width Horizontal |
GPU Block Only - One tube on each side |
2 | EK-Quantum Torque Rotary 90° |
| 4 | EK-Quantum Torque HDC | ||
| 2 | EK-Quantum Torque Double Rotary Offset 21 | ||
| GPU Block Only - Both tubes on the backplate side | 1 | EK-Quantum Torque Double Rotary Offset 28 | |
| 1 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| 1 | EK-Quantum Torque Extender Static MF 28 | ||
| 2 | EK-Quantum Torque Double Rotary Offset 21 | ||
| ABP Set - One tube on each side | 2 | EK-Quantum Torque Extender Static MF 7 | |
| 2 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| 2 | EK-Quantum Torque Double Rotary Offset 21 | ||
| ABP Set - Both tubes on the backplate side | 2 | EK-Quantum Torque Extender Static MF 7 | |
| 1 | EK-Quantum Torque Double Rotary Offset 28 | ||
| 1 | EK-Quantum Torque Rotary 90° | ||
| 4 | EK-Quantum Torque HDC | ||
| 1 | EK-Quantum Torque Extender Static MF 28 | ||
| 2 | EK-Quantum Torque Double Rotary Offset 21 | ||
Comments
0 comments
Please sign in to leave a comment.